![MiniTest MiniTest](https://www.erichsen.de/es-es/productos/ensayo-de-superficies/aplicacion-de-la-pelicula-y-espesor-del-recubrimiento/medicion-del-espesor-del-revestimiento-digital/medicion-del-espesor-del-revestimiento-digital-2/minitest-34/@@images/55eb892d-0bf8-46e7-b5d2-857f980d7014.jpeg)
MiniTest 735-FN1.5/0.7
Order number: 05253551-
Non-Binding Inquiry
With the button below you can add products to your product inquiry list if you want us to do a quote for this product.
Note this product
Medición del espesor del revestimiento (digital)
MiniTest 735-FN1.5/0.7
Los medidores de espesores de capa de la serie MiniTest permiten medir de modo no destructivo el espesor de capas no magnéticas (pintura, plástico, cromo y otras capas galvánicas no magnéticas, etc.) sobre substratos ferromagnéticos (acero/hierro) y de capas aislantes (barniz, esmalte, plástico, anodizado, etc.) sobre substratos conductivos (aluminio, cobre, titanio, acero inoxidable austenítico) abarcando, además, muchos rangos de medición.
Technical Descriptions
Norms
- DIN EN ISO 1461
- DIN EN ISO 2064
- DIN EN ISO 2178
- DIN EN ISO 2360
- DIN EN ISO 2808
- DIN EN ISO 3882
- DIN EN ISO 19840
- ASTM B 244
- ASTM B 499
- ASTM D7091
- ASTM E 376
- ASTM AS 3894.3
Technical specifications
Grosor de Capa
up to 1500 µm
DT /NDT
NDT
Humedo/ Seco
dry
Sustrato
F / NE
Dual sensors
Automatic recognition of the substrate material with FN sensors
Data memory
10 batches for a maximum of 10,000 readings (MiniTest 725 and 735)Memories can be partitioned as needed
Statistical evaluation
Number of readings, min, max, mean value, standard deviation, coefficient of variation, single value statistics, blocks statistics (norm-conforming / freely configurable)
Calibration modes
Factory calibration, zero-point-, 2-point-, 3-point-calibration, calibration method “rough“
Calibration procedures according to international standards
ISO, SSPC, “Swedish“, “Australian“
Monitoring of limits
Visual and audible signal output
Measuring units
Switchable from metric (µm, mm, cm) to imperial (mils, inch, thou)
Measuring rate
70 readings per minute in the single mode 20 readings per second in the continuous mode
Continuous mode
For quick identification of thickness variations
Operating temperature
– 10 °C ... 60 °C
Storage temperature
– 20 °C ... 70 °C
Data interfaces
USB and Bluetooth
Power supply
2 pcs batteries, type AA (Mignon); rechargeable NiMH batteries, type AA/HR6 as an option. Battery or rechargeable battery setting option to adapt to the matching nominal voltage
Norms and standards
DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, 19840, ASTM B 244, B 499, D7091, E 376, AS 3894.3, SS 1841 60, SSPC-PA 2