Model 833

Description

ERICHSEN hydraulic load cells provide a simple and economical method of measuring forces. The technique is based on the hydraulic transmission of forces which act on the piston of the force transducer. This hydraulic pressure is immediately indicated on a display unit with a scale in Newton.

Hydraulic load cells are mainly used in static applications. The increased force time (referred to the rated load) should remain constant for at least 1 second. Continuous rapid changes in force may destroy the pressure gauge. It can however be protected against shock loads arising when the load is applied or removed by means of appropriate throttles. All load cells are made of stainless steel.

Fields of application

The load cells in the Model 833 series are designed specifically for continuous use and can be fitted into machines, installations and systems of all kinds.

A significant feature of this series is the accurate dial gauge with zero offset compensation and large diameter (100 mm). By using the appropriate accessories, the measured value can also be shown on a remote display. The readings can be transmitted to the PHYSIMETER ® 906 MC-E and 906 USB by way of a pressure transducer.

Design

The display unit of the basic "A" version is attached directly to the load cell by way of a screwed connection.

In the advanced "B" version the measuring instrument is connected to the pressure gauge by a high pressure hose or a capillary tube.

Scope of delivery

• Model 833 – 2.5 kN
  • Equipped as standard with tube throttle
• Manufacturer’s Test Certificate M